The Taping Store

Easyclean™ automatic taper

Simultaneously applies tape and correct amount of joint compound for all drywall joints — drastically improves taping efficiency.

•	Stainless steel and gold anodized aluminum for light weight and durability.
•	Reaches 10-foot (3m) ceilings without stilts, benches or scaffolding.
•	Smoothest operating automatic taper available.
•	Designed to be easily cleaned and maintained.
•	One year limited warranty.

List Price Ł1,127.40

Our Price Ł890.00

Schematic Top Schematic Bottom Ops Guide

MudRunner™

Delivers joint compound to corner tools with precision control and low effort

— an easier and faster way to finish high-quality corners.

•	Only the leader, TapeTech®, has this innovative design.
•	Twist-grip flow control works equally well for right-handers or left-handers.
•	Reaches high angles from the floor.
•	One year limited warranty.

List Price Ł804.43

Our Price Ł560.00

Ops Guide

Corner roller W/handle

Firmly beds the joint tape into corner and ceiling angles, forcing out excess compound and leaving the angle ready for finishing.

•	Stainless steel rollers will not rust or mar finish.
•	Easy to clean and maintain.
•	Produces a sharp interior angle.
•	Attach to the TapeTech® Fiberglass Handle, and reach corner and ceiling angles with ease.
•	One year limited warranty.

List Price Ł133.66

Our Price Ł110.00

Mud head 90 degree outside corner

Firmly beds the joint tape into corner and ceiling angles, forcing out excess compound and leaving the angle ready for finishing.

•	Stainless steel rollers will not rust or mar finish.
•	Easy to clean and maintain.
•	Produces a sharp interior angle.
•	Attach to the TapeTech® Fiberglass Handle, and reach corner and ceiling angles with ease.
•	One year limited warranty.

List Price Ł74.03

Our Price Ł55.60

Mud head 90 degree inside corner

Firmly beds the joint tape into corner and ceiling angles, forcing out excess compound and leaving the angle ready for finishing.

•	Stainless steel rollers will not rust or mar finish.
•	Easy to clean and maintain.
•	Produces a sharp interior angle.
•	Attach to the TapeTech® Fiberglass Handle, and reach corner and ceiling angles with ease.
•	One year limited warranty.

List Price Ł74.03

Our Price Ł55.60

Flex tape outside corner roller w/handle

Beds corner bead into the compound left by the mud head.

•	Forces excess compound from under the corner bead, and prepares the tape for wipe down.
•	Uses four plastic rollers to embed the tape.
•	Works with corner roller fiberglass handle.
•	One year limited warranty.

List Price Ł118.75

Our Price Ł87.00

Easyclean Box

Evenly applies joint compound over taped joints, and leaves just the right amount of crown for a finish that requires little or no sanding. Designed to be easily cleaned even with quick-setting compounds.

•	Adjustable, hardened stainless-steel blade trowels the compound and feathers the edge.
•	Increased mud capacity for improved speed and efficiency.
•	Access to mud chamber is maximized, making it extremely easy to clean and maintain.
•	Three sizes available —7”, 10” and 12” (175mm, 250mm, 300mm).
•	One year limited warranty.
175mm 250mm 300mm List price Ł287.00 List Price Ł292.66 List Price Ł297.00 Our Price Ł195 Our Price Ł198 Our Price Ł210
	Schematic Ops Guide

Power assist box

Spring-assisted pressure plate reduces effort required to apply joint compound and feather the edges in one pass — coating joints has never been easier.

•	TapeTech® is the only manufacturer providing this innovative design.
•	Less worker effort required.
•	Large joint compound capacity.
•	Long-lasting user- adjustable blade holder fine tunes the crown for proper compound distribution.
•	Three sizes available —7”, 10” and 12” (175mm, 250mm, 300mm).
•	One year limited warranty.

175mm 250mm 300mm List price Ł302.59 List Price Ł307.56 List Price Ł312.53 Our Price Ł225 Our Price Ł235 Our Price Ł240

Schematic Ops Guide

Corner Applicator 175mm W/handle

Supplies joint compound to the corner tools.

•	Attaches directly to corner finishers and mud heads.
•	Ball joint allows flexible positioning.
•	Works with corner roller fiberglass handle.
•	Two sizes available — 7” & 8”
•	Reach high angles safely from the floor.
•	One year limited warranty.

List Price Ł228.06

Our Price Ł190.00

Corner Finisher

Produces crisp and clean interior 90-degree angles with minimal effort.

•	Wipes down and feathers both sides of the angle in one pass — quick and simple.
•	Attach to the TapeTech® Fiberglass Handle, and reach corner and ceiling angles with ease.
•	Two sizes available — 2” and 3” (50mm and 75mm).
•	One year limited warranty.

50mm 75mm List Price Ł282.06 List Price Ł287.69 Our Price Ł210 Our Price Ł220

2" Schematic 3" Schematic

EasyClean® 75mm Nail Spotter W/handle

Smaller, lighter version of the flat boxes used to cover nail or screw head depressions, removing the excess joint compound at the same time.

•	Fills an entire row of dimples in one pass.
•	Two sizes available — 2” and 3” (50mm and 75mm).
•	Rugged stainless steel construction.
•	Uses skid instead of wheels to extend blade life.
•	One year limited warranty.

List Price Ł233.03

Our Price Ł177.00

EasyClean® Pump

Fills TapeTech® Automatic Taping and Finishing Tools with just the right amount of joint compound.

•

Use with the gooseneck adapter to fill the TapeTech Automatic Taper.

•

Use with the filler to fill flat, EasyClean® and Power Assist™ boxes, nail spotters, corner applicators, and the MudRunner™.

•

Quick release easy clean foot valve reduces cleaning time.

List Price Ł297.62

Our Price Ł225.00

Schematic Ops Guide

New Product - Bazooka® Pump

The Bazooka pump is the latest innovation from Tape Tech tools for use with the TapeTech Automatic Taper.

The Bazooka pump is used in the same way as the Easyclean Pump but with the additional benefits.

•	Fills the automatic taper 40% faster.
•	Holds 60% more compund than regular pumps.
•	Variable speed setting allowing you to choose the fill rate.
•	Quick connect valve for faster interchange between the gooseneck and filler with no additional tools needed.
•	Comfort grip pump handle and extra wide foot plate.
•	Easy clean foot valve.

List Price Ł528.00

Our Price Ł280.00

Schematic

New Product - Bazooka® Pump Gooseneck

The Bazooka Gooseneck is used with the Bazooka Pump to complete the tool.

Quick connect valve for faster filling and tool less interchange.

List Price Ł113.00

Our Price Ł79.00

Box handle

Specifically designed for use with the TapeTech® Flat Box, EasyClean® Box, or Power Assist™ Box, these sturdy handles are available in size lengths 34”, 42”, 54”, and 72” — (.8m, 1m, 1.3m, 1.8m).

•	Connects to boxes for finishing flat joints.
•	1 style: straight, mill finish aluminium with adjustable grip.
•	One year limited warranty.

List Price Ł129.19 List Price Ł131.67 34" (0.8m) Our Price Ł97 42" (1m) Our Price Ł98 List Price Ł134.15 List Price Ł136.64 54" (1.3m) Our Price Ł99 72" (1.8m) Our Price Ł101.00

Gooseneck adopter

Serves as the fill connection between the EasyClean® Pump and TapeTech Automatic Taping and Finishing Tools.

•	Pump accessories used to fill other tools.
•	Gooseneck used to fill automatic taper.
•	Filler used to fill flat, EasyClean® and Power Assist™ boxes, nail spotters, corner applicators, and the MudRunner™.
•	One year limited warranty.

List Price Ł67.08

Our Price Ł59.00

Box Xtender™ Handle

The most versatile brake handle within the TapeTech® product line.

•	Strongest extendable brake handle available.
•	Adjustable grip permits customer grip sizing.
•	Can be used with 7”, 10” and 12” (175mm, 250mm, 300mm) TapeTech® Flat Box,EasyClean® Box and Power Assist™ Box.
•	One year limited warranty.

List Price Ł213.16

Our Price Ł169.00

Filler attachment

Serves as the fill connection between the EasyClean® Pump and TapeTech® Automatic Taping and Finishing Tools.

•	Pump accessories used to fill other tools.
•	Gooseneck used to fill automatic taper.
•	Filler used to fill flat, EasyClean® and Power Assist™ boxes, nail spotters, corner applicators, and the MudRunner™.
•	One year limited warranty.

List Price Ł48.20

Our Price Ł35.00

Corner Finisher Fiberglass Handle

A 3” (75mm) corner finisher with wheels. Wipes down and feathers both sides of the angle in one pass.

•	Spring alignment compensates for imperfect angles.
•	Attach to the TapeTech® Fiberglass Handle, and reach corner and ceiling angles with ease.
•	Adjustable to prevent drag and tearing of the tape.
•	Wheels glide along angle joints with less effort.
•	One year limited warranty.